home » articles » samsung hl-t and hl-s dlp starter settings

Samsung HL-T and HL-S DLP Starter Settings

Below are Avical's user-menu starter settings for the Samsung HL-Txx87/89 and HL-Sxx67/87/88 DLP RPTV displays. Please note that these settings are merely *starter* settings from which to perform a more precise user-level calibration via the aid of a setup disc such as DVE. These are also not intended as a substitute for a much more involved professional calibration which would address picture parameters not accessible within the user-menu.

  • HL-Txx87/89

  • Mode - Movie

  • Contrast - 70

  • Brightness - 45

  • Sharpness - 0

  • Color - 45

  • Tint - G50/R50

  • Color Tone - Warm2*

  • Detailed Settings

  • - Black Adjust - Off

  • - Dynamic Contrast - Off

  • - Gamma - 0

  • - White Balance - 0

  • - My Color Control - 15/15/15

  • - Edge Enhancement - Off

  • - xvYCC - Off

  • Size - Just Scan

  • Digital NR - Off

  • Active Color - Off

  • DNIe - Off

  • Color Gamut - sRGB

  • Game Mode - Off

  • HDMI Black Level - Normal

  • Film Mode - Off

  • HL-Sxx67/87/89

  • Digital NR - Off

  • DNIe - Off

  • My Color Control

  • - Red - 50

  • - Green - 70

  • - Blue - 50

  • - Yellow - 50

  • - Pink - 45

  • Mode - Movie

  • Contrast - 40

  • Brightness - 42

  • Sharpness - 0

  • Color - 45

  • Tint - G50/R50

  • Color Tone - Warm2*

  • Color Weakness - Off


*If the image appears too reddish, than "Warm1" or possibly "Normal" Color Tone might be a better choice for your particular display.

Back to articles list